Description

The Vism Universal Pistol Front and Rear Sight Tool is designed for removal, installation, and adjusting windage of dovetailed sights for most Semi-Auto Pistol slides. It features two separate sight pusher blocks. Each pusher is specifically designed for either front or rear dovetail sights. The pusher blocks are constructed from tool steel. The base platform is adjustable for height to properly align your sights at the proper height for the sight pusher blocks. The adjustable side and top clamps secure the slide in place. Side witness windows on both sides of the tool frame allow you to check for the proper sight and pusher block alignment. The sight tool frame can be bolted to or clamped onto a work surface or clamped onto a vice. It features a heavy duty blue anodized aluminum frame and the sight pusher steel screws have brass bushings for goo bearing surface characteristics and excellent strength.

• Base platform is adjustable for height, to get your slide and front & rear dovetail sights at the proper height for the sight pushers
• Includes one bottom spacer for some pocket pistol slides for proper height alignment and holding the slide recoil spring lug level on base platform
• Vertical and horizontal clamps with non-marring plastic inserts to secure various sizes and types of semi-auto slides in the tool.
• Rear sight pusher will work with 90 degree and 30 degree rear sight profiles; Front and rear sight pushers can remove, install, or adjust the sights
• Side witness windows machined into both sides of tool frame to check/verify for slide & sight pusher tool clearances and for proper sight alignment.
• Heavy duty Blue Anodized aluminum frame with steel tools
• Sight pusher steel screw has brass bushings for good bearing surface characteristics and excellent strength